Basins

Fiberglass Basins

FIBERGLASS BASINS  Series : 18  |  24  |  30  |  36  |  42 |  48  |  60  |  72

     

A - Basin Dia. Inside, B - Basin Depth, C - Basin Dia. Outside

Basin Construction

  • Basin construction is custom molded fiberglass reinforced polyester resin.  The wall thickness shall be sufficient to withstand a water saturated sand load of 120 lbs per cubic foot with a 1.5 safety factor. The bottom of the basin shall be reinforced with a fiberglass plate extending beyond the basin diameter for anchoring to a concrete pad. When secured properly to a concrete pad or pouring concrete over and around the flange, prevents the basin from rising or floating out of the ground when empty as a result of static ground pressure.  The basin will withstand a maximum temperature of 150°F (66°C).

Read more ...

Basin Covers

SOLID CHECKERED STEEL COVERS  Series : 18  |  24  |  30  |  36  |  48  |  60  |  72

Standard covers available in 1/4" thickness and above rated at 300 PSF (pounds per square foot). Steel covers are of a smooth surface available in a non-corrosive enamel finish, powder coating, epoxy coating, or galvanized finish. 

Standard:  Prime Painted

Option:  Gasketed for sanitary application (air tight seal)


SIMPLEX SMOOTH STEEL COVERS  Series : 18  |  24  |  30  |  36  |  48  |  60  |  72

Standard covers available in 1/4" thickness and above rated at 300 PSF (pounds per square foot). Steel covers are of a smooth surface available in a non-corrosive enamel finish, powder coating, epoxy coating, or galvanized finish.


DUPLEX SMOOTH STEEL COVERS  Series : 24  |  30  |  36  |  48  |  60  |  72

Standard covers available in 1/4" thickness and above rated at 300 PSF (pounds per square foot). Steel covers are of a smooth surface available in a non-corrosive enamel finish, powder coating, epoxy coating, or galvanized finish. 


SOLID STRUCTURAL FOAM COVERS  Series : 18  |  24 

Option:  Gasketed for sanitary application (air tight seal)


SMOOTH STEEL COVERS - HINGED  Series : 30  |  36  |  48  |  60  |  72

/var/folders/n4/twsktls94_n30yps9fknj0zm0000gn/T/com.microsoft.Word/WebArchiveCopyPasteTempFiles/LB-S60HDC.jpg

Smooth steel hinged covers come equipped with hinge(s), hold open bar(s) and flush mounted lifting handle(s).

Structural Foam Basins

Structural Foam BasinsThe basin can be used for sump or sewage applications and is perfect for simplex or duplex pumping systems. These are structural foam injected molded basins. Constructed from ultra strong, heavy duty structural foam, will provide decades of unfaltering service. It has a strong, thick rim, the 360 Degree EZ GrabTM handle. It also incorporates nylon encapsulated inserts to be gas/radon tight and to prohibit odor escape. The ultra-strong hex reinforced bottom will not buckle, deform or puncture, even under the harshest soil or ground water conditions.

Sizes:  
18" Dia. x 22" Deep  |  18" Dia. x 30" Deep
24" Dia. x 24" Deep  |  24" Dia. x 36" Deep
30" Dia. x 36" Deep

Polyethylene Basins

Poly BasinsThe Roll Top Basin Series is a rotationally molded, polyethylene sump basin that offersgallon capacities from 22 to 159 gallons. These basins also accept a wide variety of fittings and steel or structural foam covers.

Sizes:

24" Dia. x 24" Deep  |  24" Dia. x 30" Deep  |  24" Dia. x 36" Deep
30" Dia. x 36" Deep
36" Dia. x 36" Deep

Subcategories