Float Switches

LDS Float switches

WIDE ANGLE MECHANICAL FLOAT SWITCH- Series LDS

The wide angle Mechanical float switch is a direct acting, in-line control system for automatically controlling ½ hp and smaller pump motors. The unit has a piggyback plug attached to the cord, allowing the user to plug the pump plug directly into it, and then plug the entire unit into a standard grounded outlet.

 

 

 

 

 

  •  SWITCH:mechanical, differential angle between on/off is variable depending on distance between switch and clamp.
  • ELECTRICAL RATING:½ hp at 115volts, 1 hp at 230volts. Not over 85 Amps starting current.  13 Amps.
  • CABLE:neoprene, Type SJOW 18/2
  • FLOAT:polystyrene
  • FLOAT DIMENSIONS:67mm Dia. – 117mm long
  • TEMPERATURE:140°F (60°C)
  • INSTALLATION:pipe mounted or suspended
  • CONTACTS:Normally open

 

      ** Available in 20', 30', 50', 80' and 100' cord lengths.

LS Float switch

MECHANICAL FLOAT SWITCH- Series LS

The mechanical float switch can be installed in either a pipe mounted or suspended configuration. They are pilot duty devices which control the function of motor load devices, such as contactors, motor starters, and power relays, to automatically cycle a pump(s).  They can also be used for alarm signalling devices.  

 

 

 

  • SWITCH: Mechanical, Normally Open, differential angle between on/off is 10°
  • ELECTRICAL RATING: 10A – 115 volt AC or 230V AC
  • CORD: Neoprene, Type SJOW
  • FLOAT: Polystyrene for use in water & sewage up to 140° (60° C)
  • WATER DEPTH MAX: Maximum 30’ (9m), 13 PSI
  • FLOAT DIMENSIONS: 67mm Dia. – 117mm long
  • TEMPERATURE: 140°F (60°C)
  • WEIGHT: External (optional)
  • INSTALLATION: Pipe mounted or suspended

Subcategories